|UXC3300 Technical Specifications for Cloud Servers
|AMD EPYC 7742/7H12 64C 128T*2
The maximum memory frequency supported is 3200MHz. The nominal memory frequency, CPU model, and actual number of configured memory all influence the actual operating frequency of the memory stored in the cloud server. Example:
Dual CPU inserts 216 rams at a nominal frequency of 2933MHz, with the actual operating frequency also being 2933MHz.
Dual CPU inserts 1832 rams at a nominal frequency of 2933MHz, with a working frequency of 2666MHz.
|Total memory capacity
|Maximum capacity is 2048GB (64GB*32).
|Front 2 USB3.0 ports
|2 USB3.0 ports on the back
2: 1 VGA interface in the front, 1 VGA interface in the back
It is recommended to use a standard VGA cable; otherwise, some VGA ports may not be able to output normally; the rear VGA port is recommended.
|2x 480G SATA 6Gbbps 2.5inch Hot Swap SSD (RAID 0,1)
|SSD NVME 2T
|Hard disk slot
|It can accommodate up to 12 3.5-inch slots (compatible with 2.5-inch hard drives) and SATASAS3.0 SSD or HDD. Two backplanes are standard, with a total of eight slots available.
1*PCIEx8 dedicated storage slot is built-in.
Riser A (CPU0): 1*PCIE-E3.0x16+2*PCIE-E3.0x8, with the X16 slot only supporting the X8 speed. The top X16 slot is reserved for a four-port Gigabit network card.
1*PCIE-E3.0x16+2*PCIE-E3.0x8 riser B (CPU1)
CPU1 Riser C: 1*PCIE-E3.0x16;
When the PCIE board is not configured as expected, you must enter the BMC to switch the fan speed control strategy to balance mode.
|1x NIC_25Gbps_ 2Port_LC_OEM_E810 _OCP3.0 _MM
|4x 2200W Platinum 220VACor240VDC Hot- Swap Power Supply
|There are four system fan modules, each with two fans.
|IPMI2.0, SOL, KVM Over IP, virtual media, and other advanced management functions are supported by an integrated BMC chip, and an external RJ45 10/100/1000M management port is provided.
|8x Mthreads S3000 32GB PCle Gen5 Passive GPU
|CCC certification and China Energy Conservation Product Certification were obtained.
|87.8mm x 446mm x794mm